Pentax 8557 Digital Camera User Manual


 
118
3
Taking Pictures
In this mode, you can record multiple still pictures taken automatically at a set
interval from a set time, as a movie file.
1
Use the four-way controller (2345) to select (Interval
Movie) from the Capture Mode Palette.
2
Press the 4 button.
The current Interval Movie settings appear for approximately one minute. To
take pictures with the current settings, go to step 10.
3
Press the 4 button while the current settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
1 Press the four-way controller (5).
A pull-down menu appears.
2 Use the four-way controller (23)
to set the interval, then press the
4 button.
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Total Time].
Combining Pictures Taken at a Set Interval into a
Movie (Interval Movie)
Interval
Set the shooting interval to 1 minute, 5 minutes, 10 minutes, 30 minutes,
or 1 hour.
Total Time
Set the total time, from 10 minutes to 359 hours. The total time and the time
unit change depending on the interval set. The total time can be set in
increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Start Delay
Set the start delay, from 0 minutes to 24 hours. You can set this in 1-
minute increments. If the start time is set to 0 minutes, the first picture is
taken as soon as the shutter release button is pressed.
MENU
Total Time
1
00
hr.
0
min.
10
Interval Shot
Interval
Start Delay
min.
hr.
0
min.
0