Filter
Top Products
203
7
Connecting to a Computer
• When you intend to use a brand-new Eye-Fi card for the first time, copy the
Eye-Fi Manager installation file to your computer before formatting the
card.
• Images are transferred via a wireless LAN. Set [Eye-Fi] to P (Off), or do not
use an Eye-Fi card in locations where the use of wireless LAN devices is
restricted or prohibited, such as on airplanes.
• If you insert an older version of Eye-Fi card in the camera, an error
message appears.
• Images will not be transferred in the following situations:
- When available wireless LAN access points cannot be found
- When the battery level is low ( (yellow) or (red) is indicated)
• Transferring a large number of images may take a while. Use of the
optional AC adapter kit (K-AC117) is recommended.
• Auto Power Off does not function while transferring images.
• The camera may be turned off automatically to protect the internal
components when the inside of the camera reaches a high temperature
caused by transferring a large file such as a movie.
• Use of a wireless access point, Internet and suitable Internet settings are
required to transfer images via a wireless LAN. For more information, refer
to the website (http://www.eye.fi/).
• For details on how to use an Eye-Fi card, refer to the operating manual
supplied with the card.
• In case of malfunction of an Eye-Fi card, refer to the manufacturer of the
card.
• The camera has the function of turning on or off the wireless
communication of an Eye-Fi card. Please note, however, that not all Eye-
Fi card functions are guaranteed to operate.
• Use of an Eye-Fi card is permitted only in the country where the Eye-Fi card
is purchased. Observe local and national regulations of the country where
the card is to be used.