Filter
Top Products
110
Shooting Functions
4
You can set the camera so that focusing is performed when the = button
is pressed.
1
Select [Button Customization] in the [A Rec. Mode 5]
menu and press the four-way controller (5).
The [Button Customization] screen appears.
2
Use the four-way controller (23) to select [AF Button]
and press the four-way controller (5).
The [AF Button] screen appears.
3
Press the four-way controller (5)
and use the four-way controller
(23) to select [Enable AF].
4
Press the 4 button.
5
Press the 3 button three times.
The camera is ready to take a picture.
Using the = Button to Focus on the Subject
Enable AF
Autofocus is performed by using the = button or the
shutter release button. (default setting)
Cancel AF
\ appears in the viewfinder while the = button is
pressed. Autofocus is not performed when the shutter
release button is pressed. (Take your finger off the =
button to return to normal autofocus mode.)
AF Button
Cancel OK
OK
MENU
AF is performed when
the AF button is pressed
Enable AF
Cancel AF