Pentax K-5 II Digital Camera User Manual


 
125
Shooting Functions
4
1
Make sure that [Shake Reduction] is set to k (On) and
turn the camera off.
Refer to “Reducing Vertical and Horizontal Camera Shake” (p.122) for
details.
2
Attach a lens and turn the camera on.
The [Input Focal Length] screen appears.
3
Turn the rear e-dial (S) to set
the focal length.
Select from the following focal length
values. (The default setting is 35 mm.)
4
Press the 4 button.
The camera is ready to take a picture.
8 101215182024283035
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
When using a zoom lens, select the actual focal length at the zoom setting
being used.
To change the focal length setting, use [Input Focal Length] in the [A Rec.
Mode 4] menu.
Shooting with Self-timer
g
Self-timer
(12 sec.)
Shutter is released after about 12 seconds. Use this mode to
include the photographer in the picture.
Z
Self-timer
(2 sec.)
A mirror pops up immediately after the shutter release button is
pressed. The shutter is released after about 2 seconds. Use this mode
to avoid camera shake when the shutter release button is pressed.
Cancel OK
OK
MENU
Input Focal Length
135
120
100