Pentax M40 Digital Camera User Manual


 
67
4
Taking Pictures
*The s mode settings are as shown below.
*1 Can be set to a (Flash Off)
*2 Can be set to g (10 sec. Self-timer) or Z (2 sec. Self-timer). (The
setting in a shooting mode other than s mode is available.)
*3 Can be set to q (Macro), r (super macro) and 3 (Pan Focus)
If any other functions have been assigned to the Green button, the
camera does not switch to s mode. The assigned function is
displayed. (p.55)
•In s mode, you cannot change the information displayed on the
LCD monitor by pressing the 4/W button.
You cannot use the [A Rec. Mode]
menu or Capture Mode Palette in
s mode. If you try to display the
[A Rec. Mode] menu or Capture Mode
Palette, - (key lock icon) and a
message appear.
If you switch to
Q
mode from
s
mode,
you cannot display the [
u
Setting] menu
by pressing the
3
button. If you try to display the [
u
Setting]
menu,
-
(key lock icon) and a message appear.
When the camera is turned off in the s mode, it turns on in the
s mode next time the power switch is pressed.
Flash Mode , (Auto)
*1
Drive Mode 9 (Standard)
*2
Focus Mode = (Standard)
*3
Information Display Standard
Recorded Pixels
a
Quality Level D (Better)
White Balance F (Auto)
Focusing Area J (Multiple)
Sensitivity Auto
EV Compensation ±0.0
Digital Zoom O (On)
Instant Review 1 sec
Sharpness G (Standard)
Saturation G (Standard)
Contrast G (Standard)
Date Imprint P (Off)
Auto Picture
Auto Picture
38
38
38
Green mode must
be canceled to use
this function.
Green mode must
be canceled to use
this function.