Filter
Top Products
19
Quick Start
v Press the shutter release button.
The image will be displayed on the LCD monitor for 0.5
seconds (Instant Review) and recorded on the CF card.
When the image seen through the lens is displayed on the
LCD monitor, you can take the next picture.
Using the Shutter Release Button
The shutter release button works in a two-step action.
●Press halfway
When the shutter release button is pressed lightly (halfway),
the focus, exposure and white balance are locked.The
following information is displayed on the LCD monitor.
qFocusing area
If the subject is in focus, the frame
will light green.If the subject is not
in focus, the frame will light red.
wFlash symbol
The flash symbol indicates the
status of the flash when the shutter
release button is pressed.
eAperture and shutter speed set-
tings
The aperture and shutter speed settings are usually dis-
played in white.If the image is under- or over-exposed, they
are displayed in orange.
●Pressed down fully
When the shutter release button is pressed fully from the
halfway position, the picture is taken.
Instant Review
The Instant Review default setting is 0.5 seconds.During this
time you can delete the image.
Changing the Instant Review Time p.50
Erasing Images p.58
200200
1/1600
F2.8
1/1600
F2.8
11:19 11:19
7/30/20017/30/2001
2
31