Pentax Optio S50 Digital Camera User Manual


 
25
Getting Started
1
8 Repeat Step 7 to change the [year], [hour] and
[minutes].
Choose AM or PM if you selected [12h] in Step 3.
9 Press the OK button when you have finished the
settings.
The camera is ready to take pictures. If you set the date and time using
the MENU button, you will return to the Menu screen. Press the OK
button again.
When you finish the settings and press the OK button, the camera
clock is reset to 00 seconds.
To set the exact time, press the OK button when the time signal
(on the TV, radio, etc.) reaches 00 seconds.
When the Initial Settings or Date Adjust screen is displayed, you can
cancel the setting operation and switch to Capture mode by pressing
the MENU button. In this case, the screen will appear next time you
turn the camera on.
You can change the settings after they have been made. Refer to
“Changing the Date and Time” (p.114).
e_kb376.book Page 25 Tuesday, August 10, 2004 1:46 PM