Filter
Top Products
58
3
Common Operations
When you assign functions to the Green button, pressing the Green
button displays the menus one after another. This is useful for going
straight to the setting screens of frequently used functions such as EV
Compensation, Sensitivity and White Balance.
1 Select [Green Button] on the [u Setting] menu.
2 Press the four-way controller (5).
The Green Button screen appears.
3 Use the four-way controller (23)
to choose a number.
4 Press the four-way controller (5).
A pull-down menu appears.
5 Choose a function and press the
4 button.
6 Repeat Steps 3 to 5 to register the
necessary functions.
7 Press the shutter release button halfway.
The setting is saved and the camera returns to capture status.
Calling Up a Specific Menu
• The following functions can be assigned to the Green button:
Green Mode, Recorded Pixels, Quality Level, White Balance,
Focusing Area, Focus Limiter, Sensitivity, EV Compensation,
Sharpness, Saturation and Contrast.
• The default setting is Green mode in [1] and no function in [2], [3]
or [4].
• The setting is returned to the default setting by selecting [Reset]
on the [u Setting] menu.
•
The functions assigned to the Green button can be used in the usual
manner on the original menus ([
A
Rec. Mode] and [
u
Setting]).
• You cannot save different settings for the same function on the
Green button and on the original menu.
Assigning a Function to the Green Button
Green Button
1
Green Mode
2 Off
3 Off
4
Off
MENU
Green Button
Green Mode
1
MENU
Cancel
OK
OK
2 Recorded Pixels
3 Quality Level
4 White Balance
Focusing Area
Focus Limiter