Filter
Top Products
Connecting the camera to your PC
1 Be sure to run the installation CD first, before connecting the camera to the PC.
2 Turn on the PC.
3 Connect the desktop stand to the PC:
• Connect the USB plug of the USB/Microphone cable to the USB port of the PC.
• Connect the 3.5 mm jack plug the USB/Microphone cable to the audio input of the PC.
4 Place the camera’s USB connector on the USB connector in the desktop stand.Push it down
gently until it clicks into position.
> You will hear a beeping sound, the display lights up blue and the Charge LED lights up red.
> The camera turns on automatically and appears on the display .
> The camera will now derive its power from the PC.
Selecting the required frequency
Default frequency setting is .
1 Press the Mode button until the currently selected frequency range appears on the
display: (Europe) or (U.S.A).
2 Press the Shutter button if you wish to change the frequency.
> You will hear a beep.The frequency setting has now been changed.
ENGLISH 15
DMVC300K_Fun_01 Eng.1.qxd 25-03-2004 12:44 Pagina 15