• ‘Frame rate’: Select the image transmission speed.
Note: Transmission speed depends on network capacity and PC performance.
NetCam2 transmits a maximum of 30 frames per second, and total number of frames
transmitted by all 4 channels cannot exceed this.
• ‘Greymode’: switches to monochrome images (reduces amount of data
transmitted and therefore increases maximum frame rate.
• ‘Progressive’: builds up image from low- to high-resolution version.
Note: Progressive mode allows a low-resolution image to be quickly displayed first,
particularly when using dial-up lines.
• ‘Single shot’: freezes the image after completion of the download (also used
in combination with ‘Progressive mode’).
Menu buttons
The Full viewer has six menu buttons. They are:
• Home: goes to the NetCam2 homepage.
• Admin: goes to the administration pages for setting passwords, etc. (refer to
section 4).
• Help: goes to the help page.
• Svr Push: for real-time monitoring from behind a fire wall.
• Plug-in: loads a plug-in required for Netscape Navigator (refer to section
3.2).
• Capture: saves a screen grab as a .BMP bitmap (for importing into Windows
programs) or .EYE (for viewing in browser).
22
NetCam2 Section 3
