Filter
Top Products
G) Firmware Version and Updating the Camera
To display the firmware version:
1) Press the OK button
2) Press the navigation stick to Right to display
the Setup menu.
3) Press the navigation stick Up or Down to highlight
Firmware version and press OK.
4) The firmware version and last update will be displayed on
screen.
5) Press the navigation stick to the Left TWICE to exit the
image menu
6) Press OK
To update the camera’s firmware:
To update the camera to the newest available firmware using a
USB cable to your computer or an SD card, select Upgrade on
the firmware version page.
II. Basic Photography
To begin shooting photos in the default mode:
1) Press Power button to turn on camera.
2) Press down the Shutter button to take photo.
Note:
• Once the shutter has been released, wait until the camera has
saved the image and is ready to shoot, before removing the
memory card or battery. Removing the battery or memory
card prematurely will stop the photo from being saved.
11
SetupVideo
Firmware Version
LEFT: Exit