17. SD Memory Card
The camera uses an SD memory card with up to an 8GB
storage capacity, and may not recognize memory cards with a
larger storage capacity.
It may be necessary to format the memory card in
the following situations:
• The inserted card is unformatted;
• The card is not working properly in the camera even if it has
been previously formatted;
• The card has previously been used in another camera.
17.1 Formatting an SD Memory Card
1) If applicable, be sure the card is switched to the unlocked
position.
2) Insert the SD card into the camera.
Follow the directions in section 11.1 to format the SD memory
card.
Note:
• DO NOT remove the SD card or batteries while format-
ting to avoid card failure or corruption.
• Some SD cards have a small switch to lock and unlock the
card. To save photos, videos and audio recordings to the SD
card, the switch must be in the unlocked position.
32