Planet Technology ICA-100 Digital Camera User Manual


 
8
Chapter 3
Configuration
This Chapter provides details of the software configuration process.
Login
ICA-100 series must be configured through its built-in Web-based Configuration.
Extensive knowledge of LAN will be helpful in setting up. From the web browser, type
http ://192.168.0.20 in the address box to access Home page of ICA-100 series.
If you can't connect
If ICA-100 series do not respond, check the following:
Machine is properly installed, LAN or WLAN connection is OK, and it is
powered ON. You can test the connection by using the "Ping" com-
mand:
Open the MS-DOS window or command prompt window.
Enter the command:
ping 192.168.0.20
If no response is received, either the connection is not working, or
your PC's IP address is not compatible with ICA-100 series IP Ad-
dresses. (See next item.)
Ensure that your PC is using an IP Address within the range
192.168.0.1 to 192.168.0.254 (excluding 192.168.0.20).
Also, the Network Mask should be set to 255.255.255.0 to match ICA-
100 series.
In Windows, you can check these settings by using Control Panel-
Network to check the Properties for the TCP/IP protocol.
Home Page
After the default IP address is entered from the browser, the Home page will appear
with a still image. There will be three options to choose from to set-up and view your
Internet Camera and they are as follows:
View Image ActiveX Mode
View Image Java Mode
System Administration
3