Filter
Top Products
Chapter2 Hardware Connections
DC Power
Jack
LAN Socket
and LEDs
Factory
Default Reset
DC Power Jack
The DC power input jack is located on the Network Camera’s bottom. The input power is
5VDC. Note that supply the power to the Network Camera with standard power adapter
included in package. Otherwise, the improper power adapter may damage the unit and
result in danger.
LAN Socket
Beside the DC power Jack, the LAN socket is an RJ-45 connector for connections to
10Base-T or 100Base-TX Fast Ethernet cabling. Please use Category 5 “straight
through” cable to connect the Network Camera to an Ethernet network switch or hub.
10/100M Ethernet LEDs
LED stands for Light-Emitting Diode. The Ethernet LEDs are located on the RJ-45
connector. These LEDs are used to indicate the status of Network connection.
Factory Default Reset
This button is hidden in the pinhole under then Network Camera’s bottom. Please refer
to the Appendix A in this manual for more information.
7/60