Filter
Top Products
Changing Battery
By putting the two handles at the bottom together the battery
cassette is released and the battery can easily be pulled out. A
new battery is pushed all the way into the generator and is
locked by directing the handles away from each other. When
changing the battery it must be mounted in a battery cassette
by an authorised service station. If the battery is not pur-
chased at Profoto a Hitachi HV 12 -12 unit must be used.
Connecting Lamp Heads
One or two lamp heads can be connected to the lamp head
sockets A & B [1]. When connecting the lamp head plug,
align the dots on the plug with the white dot on the generator
panel. Secure by turning the locking ring on the plug clockwise.
Energy Control
The energy output is regulated over seven f:stops. The energy
can partly be adjusted with the control MASTER [13] in 1/6
f:stop increments, from 1/1 down to 1/16 of the total energy
(equivalent to five f:stops) partly with the SYM/ASYM
switch [2] through one or two lamp heads.
One lamp head: The total energy chosen is obtained if the
lamp head is connected to A and the SYM/ASYM switch is at
A 1/1(1/2), B 1/2. The lamp head can be connected to socket A
or B. If the lamp head is connected to A the total energy is
obtained chosen with the control MASTER [13]. If the lamp
36
[1] [2]
[6]