Filter
Top Products
Pro-7b head
The Pro-7b head is a small and easily transportable flash
head exclusively designed for the Pro-7b generator. Please
note that when changing modelling light, flash tube or glass
cover the lamp cable must be disconnected from the genera-
tor. The modelling light is a standard 100W lamp with an
E11 socket. The flash tube has two pins. When removing a
flash tube, pull it straight out of the sockets. When inserting
a new flash tube, check that the trigger-wire clasps properly
around the flash tube (please see mounting instructions in
package). The head has no fan. Because of the heat generat-
ed there is a certain limitation to the number of flashes per
minute. At the back of the head there is an opening for
attaching accessories like filters and barn doors.
ProHead Pro-7b head
9
ProHead cont.
10.15.28 Flash Tube, uncoated
10.20.02 Modelling Light 250 W, 120 V, Mini-can socket (E11)
10.07.09 Handle for Pro-7 head, Pro-7b head and Pro-7 twin
10.15.28 Flash Tube, uncoated
10.20.14 Modelling light 100 W, 120 V, E11 socket