MOUNTING AND REMOVING THE FLASH FROM THE CAMERA
8 | Mounting and Removing Flash
• FOR Canon, Nikon, Pentax and Olympus/Panasonic flash
(1) Mounting the flash
With the back of the flash facing you, loosen the locking ring by turning it to the right until you can easily
slide the flash forward into your camera’s hot shoe. Then tighten the locking ring by turning it to the left
until the flash is firmly mounted onto the camera.
(2) Removing the flash
Carefully turn the locking ring to the right so it becomes loose. Once you can no longer easily turn the
locking ring, slide the flash towards you to remove the flash from the camera’s hot shoe.
1a 1b 2