Filter
Top Products
Flash Exposure Compensation and Power Saving | 27
FLASH EXPOSURE COMPENSATION
POWER SAVE MODE
In TTL mode, you can apply flash exposure compensation by pressing the flash exposure compensation
button on your camera and adjust the flash exposure level up and down with your camera’s controls.
The range and control of flash exposure compensation vary between different camera models. Consult
your camera manual for more information about this feature.
If there is no communication between the flash and the camera for approximately 3 minutes, the flash will
automatically enter power save mode to conserve battery power. In this mode, "OFF" will appear on the
LCD. The Ready light will be off in power save mode.
To reactivate the flash, press any button on the LCD panel or the camera’s shutter release button.
If you are not going to use your flash for an extended period, we recommend that you power the flash off
completely, using the power switch.