Filter
Top Products
Connections & Setup
Chapter 1 19
Using the Power Supply
The power supply attaches to the camcorder and lets you power it directly from standard
household power. The power supply operates on 110-240 volts, 50/60 Hz.
1. Plug the small end of the power supply into the DC IN jack on the camcorder.
2. Plug the other end of the power supply into a working AC outlet (110-240V, 50/
60Hz).
Caution: Only use the power supply provided with this unit. Using other power
supplies may damage the unit.
EXPOSURE
BACK
LIGHT
NIGHT
ALIVE
P.AE
MENU/
BRIGHT
SNAP
SHOT
VOL.
CHARGE
Removing the power supply
1. Make sure the Power switch is set to OFF.
2. Unplug the power supply from the AC outlet.
3. Unplug the small end of the power supply from the DC IN jack on the camcorder.
Important: Before detaching the power source, make sure the camcorder’s power
is turned off. Failure to do so can result in a camcorder malfunction.
Using an Optional Plug Adapter in Foreign Countries
An optional plug adapter might be required in some countries.
1. Plug the power supply’s plug into the AC plug adapter.
2. Plug the AC plug adapter into the AC outlet.
DC IN jack
AC power supply
2
1