Filter
Top Products
DC IN
6V
OPEN
T
W
INST.
ZOOM
FOCUS
DATE/TITLE
DISPLAY
PLAY
F.F.
EDIT
SEARCH
STOP
REW
F
N
36
Titler
The titler can store a title page in memory that can be displayed and recorded at any
time. The built-in character register contains 47 characters for creating titles on two
lines with up to 16 characters per line.
Creating a Title
1. Attach a power source and slide the
CAM/OFF/VCR switch to CAM or
VCR.
2. Press TITLE ON/OFF on the remote to
display the title graphics.
Note: If the CAM/OFF/VCR switch is in
CAM, pressing DATE/TITLE on the
camcorder will also display the title page.
3. Press STOP to move the flashing
cursor to the place you want to begin.
4. Select the first character by pressing
F.F (F.FWD on remote) or REW until
the character you want appears. See
the “Chart of Characters” on the next
page for the characters available in the
titler’s register.
5. After you have selected the first
character, press STOP to move the
flashing cursor to next position.
REW Button
REW Button
CAM/OFF/VCR Switch
PLAY Button
F.F Button
DATE/TITLE Button
Thumb Trigger
STOP
Button
PLAY Button
PAUSE/
RECORD
Button
F.FWD
Button
STOP Button
TITLE
ON/OFF
Button
REW F.FWD
STOP PLAY
A/V DUB PAUSE
DISPLAY
RESET
TITLE
RECORD
T
W
ZOOM
ON
OFF
S.EDIT
6. Repeat steps 4 and 5 until you have
completed the title.
Note: To correct a character, press STOP
to place the cursor over it and then press
F.F (F.FWD on remote) or REW to enter
the correct character.
If you want to delete a character, press
F.F (F.FWD on remote) or REW until the
blank space appears.
7. Press TITLE ON/OFF on remote to
store the title and remove the title
display from the viewfinder when you
are finished.
Important Note: Remember to remove the
title graphics from the viewfinder for normal
recording.