Filter
Top Products
3
61
Shooting
4 Set the parameters.
Available operations
5 Press E.
The screen of Step 2 reappears.
6 Press E.
The control panel reappears.
7 Press F.
The camera returns to standby mode.
u Caution
• This function cannot be used in some capture modes or
in combination with some other functions. (p.88)
• [Digital Filter] of the A1 menu cannot be selected
in C mode. When in C mode, set from [Digital Filter]
of the C1 menu.
• Depending on the filter used, it may take longer to save
images.
t Memo
• Images can also be processed with digital filters in playback
mode. (p.72)
Expands the dynamic range and enables a wider range of tones
to be recorded by the CMOS sensor and reduces
the occurrence of overexposed/underexposed areas.
Set in the control panel or [D-Range Settings] of the A2 menu.
u Caution
• When the sensitivity is set to less than ISO 200, [Highlight
Correction] cannot be set to [On].
t Memo
• [Highlight Correction] in C mode can be set to [Auto] or [Off].
AB
Selects a parameter.
CD
Adjusts the value.
Extracted Color 1
Extracted Color 1
Cancel
Cancel
Check
Check
OK
OK
Correcting Images
Brightness Adjustment
Highlight Correction/Shadow Correction
v/A2
Highlight Correction
Highlight Correction
Auto
Auto
Cancel
Cancel
OK
OK
Shadow Correction
Shadow Correction
Auto
Auto
Cancel
Cancel
OK
OK
e_kb558_om.book Page 61 Tuesday, September 16, 2014 11:59 AM