Ricoh 06578 Digital Camera User Manual


 
6
92
Appendix
4 Use AB to set the focal
length.
Press C to select a value from
the list.
When using a zoom lens, select
the actual focal length to be used
for shooting.
5 Press E.
The camera returns to standby mode.
t Memo
The focal length setting can be changed in [Input Focal
Length] of the A3 menu.
When using a lens without an 9 position or a lens with an 9
position with the aperture ring set to a position other than 9,
set [26 Using Aperture Ring] to [Enable] in the E4 menu.
(p.92)
The shutter can be released even if the aperture ring
of the D FA, FA, F or A lens is not set to the 9 position
or a lens without an 9 position is attached.
Select [Enable] in [26 Using Aperture
Ring] of the E4 menu.
The following restrictions apply depending on the lens
being used.
t Memo
If the aperture ring is set to a position other than 9, the
camera operates in J mode regardless of the mode dial
setting except when set to L or M mode.
[F--] appears for the aperture indicator in the status screen,
Live View screen and viewfinder.
Using the Aperture Ring
E4
35
35
mm
mm
OK
OK
Input Focal Length
Input Focal Length
26
26
25
25
1
1
1
1
2
2
Using Aperture Ring
Using Aperture Ring
Disable
Disable
Enable
Enable
Shutter will release when
Shutter will release when
aperture ring is not set to the
aperture ring is not set to the
"A" position
"A" position
OK
OK
Cancel
Cancel
Lens Used
Capture
Mode
Restriction
D FA, FA, F, A, M
(lens only or with
automatic diaphragm
accessories such as
auto extension tube
K)
J
The aperture remains open.
The shutter speed changes in
relation to the open aperture
but an exposure deviation may
occur.
D FA, FA, F, A, M, S
(with diaphragm
accessories such as
extension tube K)
J
Pictures can be taken with a
set aperture value but an
exposure deviation may occur.
Manual diaphragm
lens such as reflex
lens (lens only)
J
FA SOFT 28mm/
FA SOFT 85mm/
F SOFT 85mm
(lens only)
J
Pictures can be taken with a
set aperture value in the
manual aperture range.
e_kb558_om.book Page 92 Tuesday, September 16, 2014 11:59 AM