Filter
Top Products
2
31
Getting Started
4 Close the battery/memory
card cover.
u Caution
• Do not remove the memory card while the card access lamp
(orange) is lit.
• If the battery/memory card cover is opened while the power is
on, the camera turns off. Do not open the cover while the
camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.33)
• Use a high-speed memory card when recording movies. If the
write speed cannot keep up with the recording speed, the
writing may stop during recording.
t Memo
• When using an Eye-Fi card or a Flucard, refer to “Using a
Wireless Memory Card” (p.81).
Turn the camera on and make the initial settings.
1 Turn the main switch to
[ON].
The lamp lights up in green.
The first time the camera is
turned on after purchase, the
[Language/
W
] screen appears.
t Memo
• The power automatically turns off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D3 menu. (p.23)
1 Use ABCD to select the desired language and
press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need to be
changed.
2 Press B to move the frame to F and press D.
The [F Hometown] screen appears.
Initial Settings
Turning the Camera On
Setting the Display Language
Text Size
Text Size
Std.
Std.
New York
New York
English
English
Initial Setting
Initial Setting
Settings complete
Settings complete
Cancel
Cancel