Filter
Top Products
3
41
Shooting
1 Turn the mode dial to select the desired
exposure mode.
V appears on the status screen
for the value that can be
changed.
The value that can be changed is
underlined in the viewfinder.
During Live View, D appears for
the value that can be changed.
2 Turn V.
In K/L mode, press J to
select the value to be changed.
t Memo
•
The settings for exposure can be specified in increments of 1/3
EV steps. In [1 EV Steps] of the
E
1 menu, you can change the
adjustment steps to 1/2 EV steps.
• A proper exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is set
to a certain sensitivity.
•In L mode, the difference from the proper exposure is
displayed on the EV bar scale while exposure is adjusted.
•In M mode, [Drive Mode] cannot be set to [Continuous
Shooting] or [Exposure Bracketing].
• You can set the function of the M button for when the camera
is in L/K mode. Set in [Button Customization] of the A4
menu. (p.75)
• When shooting with a low shutter speed, you can reduce
image noise from the control panel or [Slow Shutter Speed
NR] of the A2 menu.
1/1/
3030
100100
FF
4.54.5
9999999999
1/
30
1/
30
F4.5
F4.5
100
100
99999
99999
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
On
Applies Noise Reduction when the shutter speed is
slower than 1 second.
Off
Does not apply Noise Reduction at any shutter
speed.
Checking the Depth of Field (Preview)
When [Optical Preview] or [Digital Preview] is assigned to M
in [Green Button] of [Button Customization] in the A4 menu,
you can check the depth of field before taking pictures.
(p.73)