Filter
Top Products
31/32
FV-L200B1
User’s Guide Rev. 1.01
Command No. Command Descriptions
C5H: [70] [Look-up table (Gamma)] Initial data: [7..0] = 00H
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D3: No function Always set as “00000”
D2: Look-up table (RAM) 0: OFF 1: Load
D1: Look-up table upload 0: RAM only 1: RAM and ROM
D0: No function Always set as “0”
F0H:[70] [Signal selection for the I/O connector] Initial data: [70] = the value of 00H, data range: 0 to 15
Sets the signals of the I/O connector.
D[7..0]
D7
D6
D5
D4
D3
D2
D1
D0
D7 to D4: No function Always set as “0000”
D3~D0: The signals of the /IO connector selection 0H: Option 0 1H: Option 1
2H: Option 2 3H: Option 3
4H: Option 4 5H: Option 5
6H: Option 6
7H to FH: No function
(Prohibited settings. Do not set these values)
Please refer to the table 3 I/O Connector Settings for the details.