Roper PXD1000 Digital Camera User Manual


 
2
PXD1000. The Technical Support section of the Imagenaiton Web site
will contain the latest and most up-to-date information on supported
digital cameras.
The following is a partial list of supported cameras (see Web for updated
list www.imagenation.com as this list is constantly expanding).
Camera Configuration Files & Guides
BASLER
BA101 Basler Area Scan A101 (Previously A113)
BL102 Basler Line Scan L102 (Previously L130)
BL203 Basler Line Scan L203 (Previously L240)
DALSA
DALSA Dalsa CA-D4/D7
HITACHI
KPF100 Hitachi KPF 100
KODAK
Kodak MASD has been acquired by Roper Scientific
ES10 Kodak Megaplus ES 1.0
ES14 Kodak Megaplus ES 1.4i
PULNIX
TM1001 Pulnix TM 1001-02
TM1010 Pulnix TM 1010
TM1040 Pulnix TM 1040
TM1300 Pulnix TM 1300
TM9701 Pulnix TM 9701
RETICON
RLS Reticon Line Scan
UNIQ
UNIQ UNIQ Cameras: UP-600, UP-1000, UP-1030, UP-900
2) Build your own cable:
If your camera is not listed you will need to create a camera definition file
and build a compatible cable. We provide an easy-to-use camera
configuration application and customizable cable assemblies that simplify
camera and frame grabber setup. If you decide to build the entire cable
you will need to consult your camera manual for the part number of the
connector used on the camera. The mating cable plug for the PXD1000 is
an AMP Amplimite .050 Series Cable Plug Connector, Series III (AMP
PN: 749621-9) or equivalent. Imagenation also has two kit options for
building your own cable from scratch:
1) Cable Kit CB-011 contains 50 twisted pairs and supports up to a full
32-bit camera.
2) Cable kit CB-012 contains 37 twisted pairs and is an option for one
and two channel digital camera implementations of 10-bits or less.