Samsung AD68-00516C Camcorder User Manual


 
61
Advanced Recording Perfectionnez vos enregistrements
ENGLISH
FRANÇAIS
You can customize settings and save them for future use.
The CUSTOM SET function operates in CAMERA,
M.REC mode only.
Please set the custom settings before using this function.
(see page 51)
1. Set the power switch to CAMERA mode.
2. To activate the CUSTOM function, press the
CUSTOM button.
“CUSTOM.Q” will be displayed on the screen.
3. Press START/STOP to start recording.
Recording will begin using the CUSTOM settings.
4. To switch CUSTOM mode off, press the CUSTOM
button again.
The camcorder will revert to the settings that were
set prior to custom mode being selected.
Note
The CUSTOM mode settings are deleted when a battery pack is
uninstalled and therefore they must be reset when a battery pack has
been replaced.
While setting the NITE PIX to ON, the CUSTOM function does not
work.
CUSTOM Mode
La fonction CUSTOM vous permet de personnaliser et de
mémoriser des réglages pour vos enregistrements ultérieurs.
Cette fonction est uniquement disponible en mode caméscope et
enregistrement photo.
Avant d'activer cette fonction, vous devez avoir personnalisé vos
réglages à l'aide de la fonction CUSTOM SET (voir page 51).
1. Réglez le caméscope sur CAMERA.
2. Pour sélectionner l'option CUSTOM, appuyez sur la
touche CUSTOM.
L'indication "CUSTOM.Q" apparaît sur l'écran.
3. Appuyez sur la touche START/STOP pour démarrer
l'enregistrement.
L'enregistrement s'effectue selon vos réglages
personnalisés.
4. Appuyez sur la touche CUSTOM pour annuler le
mode CUSTOM.
Le caméscope retrouve ses réglages antérieurs.
Important
Le caméscope ne garde pas en mémoire les réglages du mode
CUSTOM si la batterie a été remplacée. Vous devrez alors effectuer
de nouveaux réglages.
Lorsque vous activez NITE PIX, la fonction CUSTOM n’est pas
utilisable.
Enregistrement en mode personnalisé (CUSTOM)
MIRROR
CUSTOM
0 : 0 0 : 0 0
1 0 : 0 0 AM
M A Y . 1 0 . 2 0 0 2
STBY
5 3 min
CUSTOM
00516C SCD86(UK+FRA) (28~61) 2/11/03 8:50 AM Page 61