Filter
Top Products
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.
The Hand strap enables you to:
- Hold the Camcorder in a stable, comfortable position.
- Press the ZOOM and Start/Stop button without having to change the position of your hand.
1. Insert the Hand strap into the
Hand strap hook on the front side
of the Camcorder and pull its end
through the hook.
2. Insert your hand into the hand
strap and adjust its length for
your convenience.
3. Close the Hand strap.
1. Pull and open the Hand strap
cover to release the Hand strap.
2. Remove it from the ring and
adjust its length.
3. Put your hand through the Hand
Strap and close the cover of
Hand Strap.
1. Hook up the Lens cover with the
Lens cover strap as illustrated.
2. Hook up the Lens cover strap to
the Hand strap, and adjust it
following the steps as described
for the Hand strap
3. Close the Hand strap.
1 2 3
1 2 3
ENGLISH
Preparation
1818
Adjusting the Hand Strap
Hand Strap
When You carry Your Camcorder
Attaching the Lens Cover
1 2 3