Samsung D353(i) Camcorder User Manual


 
ENGLISH
Playback
7777
The Audio Dubbing function works only in Player Mode.
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
Use the internal or an external microphone(not supplied) or other audio equipment.
The original sound will not be erased.
1. Set the Power switch to PLAYER.
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
2. Set the Mode switch to TAPE.
3. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
4. Press the (PLAY/STILL) button to pause the scene.
5. Press the A.DUB button on the remote control.
Audio Dubbing icon ( ) will be displayed on the LCD screen.
The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
Press the (STOP) button to stop the dubbing.
[ Notes ]
You can not use the Audio Dubbing function while playing a write protected video tape.
To utilise an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable to connect
external sound source input.
To dub an external sound source, set the AV In/Out function to In (VP-D353i/D354i/D355i only). (see page 76).
Dubbing Sound
Audio Dubbing (VP-D353(i)/D354(i)/D355(i) only)
DV
USB
AV
MIC
1
3 4 5