Filter
Top Products
ENGLISH
System Menu Setting
2727
✤ Clock setup works in Camera/Player/M.Cam/M.Player modes.
✤ The Date/Time is automatically recorded onto a tape.
Before recording, please set the Date/Time.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE or MEMORY CARD. (VP-D353(i)/D354(i)/D355(i) only)
3. Press the MENU button.
■
The menu list will appear.
4. Move the Menu selector to the left or right to select System, then press the Menu selector.
5. Move the Menu selector to the left or right to select Clock Set, then press the Menu selector.
■
The year will highlight first.
6. Move the Menu selector to the left or right to set current Year, then press the Menu selector.
■
The month will be highlighted.
7. You can set the month, day, hour and minute following the same procedure for setting
the year.
8. Press the Menu selector after setting the minutes.
■
The message Complete! will be displayed.
■
To adjust the clock, select the Year, Month, Day, Hour or Min by pressing the Menu selector,
then move the Menu selector to the left or right to set respective values.
9. To exit, press the MENU button.
[ Notes ]
■
After the Lithium battery loses its charge (after about 6 months), the date/time appears on the screen as 00:00 1.JAN.2005.
■
You can set the year up to 2037.
■
If the Lithium battery is not installed, any input data will not be backed up.
Setting the Clock
Adjust Select Exit
MENU
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
1 JAN 2005
00 : 00
…
†
Move Select Exit
MENU
Camera Mode
Back
Clock Set
Beep Sound
Language
Demonstration
1 JAN 2005
00 : 00
Complete!
Camera Mode
√System
Clock Set
Beep Sound
Language
Demonstration
√On
√English
√On
Move Select Exit
MENU
4
5
8