Filter
Top Products
ENGLISH
3535
Basic Recording
Recording with Ease for Beginners (EASY.Q Mode)
✤ The EASY.Q function works only in <Camera> mode. ➥page 19
✤ The EASY.Q function allows a beginner to easily make good recordings.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)
3. By pressing the [EASY.Q] button, all functions on the Camcorder will be set to off and the
recording settings will be set to the following basic modes:
■
The words <EASY.Q> and <DIS ( )> are displayed at the same time.
4. Press the [Start/Stop] button to start recording.
■
Recording will begin using the basic automatic settings.
5. Press the [EASY.Q] button again in the STBY mode and then turn the EASY.Q mode off.
■
The EASY.Q function will not turn off while you are recording.
■
The Camcorder will return to the settings that were set prior to activating EASY.Q mode.
[ Notes ]
■
Unavailable buttons during operation
During operation EASY.Q, the following buttons are unavailable because the items are
automatically set. The corresponding messages may appear if unavailable operations are
attempted.
- MENU button
- C.NITE button
- Q.MENU button
■
The EASY.Q mode settings are deleted when the Battery Pack is removed from the
Camcorder and must be reset when the Battery Pack is replaced.
■
Taking a still image using the [PHOTO] button while EASY.Q is set releases the DIS
function.
3
1
60min
0:00:10
SP
STBY
√
01227G VPD371 UK~042 2/1/07 12:03 PM Page 35