Filter
Top Products
ENGLISH
3838
Basic Recording
Self Record using the Remote Control (Setting the Self Timer) (VP-D375W(i)/D975W(i) only)
✤ The SELF TIMER function works only in <Camera> mode. ➥page 19
✤ When you use the SELF TIMER function on the remote control, the recording begins
automatically in 10 seconds.
1. Set the [Power] switch to [CAMERA].
2. Set the [Mode] switch to [TAPE].
3. Press the [SELF TIMER] button until the appropriate indicator is displayed.
4. Press the [Start/Stop] button to start the timer.
■
SELF TIMER starts counting down from 10 with a beep sound.
■
If you want to cancel the SELF TIMER function before recording, press the [SELF
TIMER] button.
5. Press the [Start/Stop] button again when you wish to stop recording.
[ Notes ]
■
Do not obstruct the remote control sensor by putting obstacles between the remote
control and Camcorder.
■
The remote control range is 4 ~5m (13 ~17 ft).
■
The effective remote control angle is up to 30 degrees left /right from the centre line.
■
Using a tripod (not supplied) is recommended for delayed recording.
œ
1
3
45
œ
01227G VPD371 UK~042 2/1/07 12:03 PM Page 38