Filter
Top Products
30
Removing the SD memory card
1. Turn the power off using the power switch ( ).
2. Open the card cover and press the CARD as shown in the
image and release.
3. Remove the CARD and close the card cover.
NOTICE
Don t remove the CARD when the camera status LED(red) is blinking as this may cause
damaged data in the CARD.
PREPARATION
The CARD has a write protect switch that prevents image files from being deleted or formatted. By
sliding the switch to the bottom of the card, the data will be protected.
By sliding the switch to the top of the card, the data protection will be canceled. Check the switch
position before taking an image.
SD(Secure Digital) memory card
Write protect
switch
Label
Card
pins