Filter
Top Products
61
PLAY MODE
PROTECT
This is used to protect specific shots from accidental erasing (LOCK).
It also releases images that have been previously protected (UNLOCK).
Protecting images
1. Turn the camera power on.
2. Press the MODE button to select the PLAY mode
3. Select an image that you want to protect by pressing the
LEFT( )/ RIGHT( ) button.
4. Press the MENU button to display the PLAY mode menu
on the LCD monitor.
5. Select [PROTECT] by pressing the UP( ) /DOWN( )
button and press the OK button.
6. Press the UP( ) /DOWN( ) button and select [ONE
IMAGE] or [ALL IMAGE].
- ONE IMAGE : This protects a single image.
- ALL IMAGES : This protects all the images in the
memory.
7. Press the LEFT( )/ RIGHT( ) button and select [LOCK]
or [UNLOCK].
8. Press the Ok button to confirm the setting.
- LOCK : Sets up the PROTECT function.
- UNLOCK : Discards the protect function.
If you protect an image, the protect icon( ) will be displayed on the LCD monitor.
NOTICE
An image in LOCK mode will be protected from [DELETE] or [DELETE ALL] functions,
but will NOT be protected from the [FORMAT] function.
PLAY 1/2
SETUP
SLIDE SHOW
PROTECT
DELETE ALL
PLAY 1/2
ONE IMAGE
ALL IMAGE
LOCK UNLOCK
ADVANCED