Filter
Top Products
45
RECORDING MODE
EV COMPENSATION
In STILL IMAGE/MOVIE CLIP mode, you can select the exposure value.
This camera automatically adjusts the exposure according to the ambient lighting conditions.
However, you can select the exposure value by using the [EXPOSURE] sub menu.
Exposure compensation setting range : -2.0 ~ +2.0 EV (0.5 EV steps)
If you increase the exposure value, the image will be brighter.
If you decrease the exposure value, the image will be darker.
Selecting the exposure value
1. Turn the camera power on.
2. Select STILL IMAGE or MOVIE CLIP mode by pressing
the MODE button.
3. Press the MENU button to display the STILL
IMAGE/MOVIE CLIP mode menu on the LCD monitor.
4. Press the UP( )/ DOWN( ) button and select
[EXPOSURE].
5. Select the desired EV compensation by pressing the
LEFT( )/ RIGHT( ) button.
6. Press the Ok button to confirm the setting.
The default is 0.0EV.
If you change the exposure compensation value in the STILL
IMAGE mode, the changed value is also applied to the
MOVIE CLIP mode.
STILL IMAGE mode
STILL IMAGE 1/2
SETUP
IMAGE SIZE
QUALITY
EXPOSURE
0.0 EV
MOVIE CLIP mode
MOVIE CLIP
SETUP
EXPOSURE
WHITE BALANCE
LCD BRIGHTNESS
0.0 EV
ADVANCED