Filter
Top Products
77
SETTING UP THE CAMERA SYSTEM
VIDEO OUT
Selecting the video out type
Steps 1 to 5 are the same as those for selecting the SETUP
mode(p.68).
6. To shift the menu cursor to [SETUP 2/3], press the
DOWN( ) button at the [RESET] menu that is in [SETUP
1/3].
7. To shift the menu cursor to [SETUP 3/3], press the
DOWN( ) button at the [LANGUAGE] menu that is in
[SETUP 2/3].
8. Select [[NTSC/60Hz]] or [PAL/50Hz] by pressing the LEFT( )/ RIGHT( ) button.
9. Press the OK button to confirm the setting.
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden,
Switzerland, Thailand, Norway.
The alternating current frequency influences the image quality. In a country that takes NTSC video
output type(A.C frequency : 60Hz), select [NTSC/60Hz] sub menu. In a country takes video output
type(A.C frequency : 50Hz), select [PAL/50Hz] sub menu. Otherwise, there will be white lines on a
stored image.
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be
governed by the type of machine (monitor or TV, etc.) to which the camera is connected.
Select the correct movie standard for the outer monitor. PAL mode can support only BDGHI.
SETUP 3/3
VIDEO OUT
NTSC PAL
ADVANCED