Filter
Top Products
81
Before contacting a service centre
Please check the following
Symptom Causes Remedy
- Insert fresh batteries
- Connect an AC Power Adapter
- Insert the batteries according to the polarity
marks (+, -)
- There is low battery capacity
- An AC Power Adapter is not
connected
- Batteries are inserted
incorrectly with the reverse
polarities
- The batteries are exhausted
- The Camera is turned off
automatically
- The Adapter plug is not
connected securely
- The Camera is being used in
low temperatures
- There is insufficient memory
capacity
-The memory card has not
been formatted
- The memory card is exhausted
- The camera’s power is off
- The batteries are exhausted
- The memory card is locked
- Batteries are inserted
incorrectly with the reverse
polarities
The camera doesn t
switch on
The camera power
ceases while in use
Batteries drain
quickly
Camera does not
take images when
pressing the Shutter
button
- Insert fresh batteries
- Press the power button to reactivate camera
- Remove and re-insert the plug
- Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only remove it
in order to take images
- Delete unnecessary image files
- Format the memory card (p.71)
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
- Refer to [CARD LOCKED!] error message
(p.80)
- Insert the batteries according to the polarity
marks (+, -)
- The camera was stopped due
to a malfunction
The camera
suddenly stops
working while in use
- Remove /re-insert batteries and switch the
camera on