Filter
Top Products
Connecting to a WLAN and conguring network settings
Wireless network
109
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [
t
] to open network setting options.
•
When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p.112)
•
When a login page appears, refer to "Using the login browser". (p.110)
•
When you select an unsecured AP, the camera will connect to the WLAN.
•
If you select a WPS prole supported AP, select WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS prole
supported AP by selecting
WPS button connection on the camera, and
then pushing the WPS button on the AP device.
Setting network options
1
In the Wi-Fi Setting screen, move to an AP, and then press [
t
].
2
Select each option, and then enter the required information.
Option Description
Network Password
Enter the network password.
IP Setting
Set the IP address automatically or manually.