Filter
Top Products
Camera maintenance
Appendixes
142
Low battery message
When the battery has fully discharged, the battery icon will turn red and the "Low
Battery" message will appear.
Notes about using the battery
•
Avoid exposing batteries to very cold or very hot temperatures (below 0 °C/32 °F
or above 40 °C/104 °F). Extreme temperatures can reduce the charging capacity of
your batteries.
•
When you use the camera for an extended period, the area around the battery
chamber may become warm. This does not aect the normal use of the camera.
•
Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a re or electric shock.
•
In temperatures below 0 °C/32 °F, battery capacity and battery life may decrease.
•
Battery capacity may decrease in low temperatures, but will return to normal in
milder temperatures.
•
Remove the batteries from your camera when storing it for an extended period.
Installed batteries may leak or corrode over time and cause serious damage
to your camera. Storing the camera for extended periods with the battery
installed causes the battery to discharge. You may not be able to recharge a fully
discharged battery.
•
When you do not use the camera for an extended period (3 months or more),
check the battery and recharge it regularly. If you let the battery discharge
continually, its capacity and life may decrease, which can lead to a malfunction,
re, or explosion.
Cautions about using the battery
Protect batteries, chargers, and memory cards from damage
Prevent batteries from making contact with metal objects, as this can create a
connection between the + and – terminals of your battery and lead to temporary or
permanent battery damage and may cause a re or electric shock.
Notes about charging the battery
•
If the status lamp is o, make sure that the battery is inserted correctly.
•
If the camera is on while charging, the battery may not fully charge. Turn o the
camera before charging the battery.
•
Do not use your camera when you are charging the battery. This may cause a re
or electric shock.
•
Do not pull the power supply cord to disconnect the plug from the power outlet,
as this may cause a re or electric shock.
•
Let the battery charge for at least 10 minutes before turning on the camera.
•
If you connect the camera to an external power source when the battery is
depleted, using high energy-consuming functions will cause the camera to turn
o. To use the camera normally, recharge the battery.