Filter
Top Products
Shooting in the dark
Shooting options
67
Icon Description
Auto: The ash will re automatically when the subject or
background is dark.
Red-eye:
•
The ash will re twice when the subject or background is dark
to reduce the red-eye eect.
•
There is an interval between the 2 bursts of the ash. Do not
move until the ash res a second time.
Fill in:
•
The ash always res.
•
The camera automatically adjusts light intensity.
Slow Sync:
•
The ash res and the shutter stays open longer.
•
This option is recommended when you want to capture more
ambient light to reveal more details in the background.
•
Use a tripod to prevent your photos from blurring.
•
The camera will display the shake warning when you are
shooting in low light.
Red-eye Fix:
•
The ash res twice when the subject or background is dark.
The camera corrects red-eyes through its advanced software
analysis.
•
There is an interval between the 2 bursts of the ash. Do not
move until the ash res a second time.
Available options may dier depending on the shooting conditions.
•
Flash options are not available if you set burst options or select Blink Detection.
•
Make sure that your subjects are within the recommended distance from the
ash. (p.149)
•
If light from the ash is reected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
•
In some modes, you can also set the ash option by pressing [
m
], and then
selecting Flash.