Filter
Top Products
<<
84
>>
■ Connecting the camera to a PC
When using the cradle
If you selected [Printer] in Step 2, when you connect the camera to your
printer
, the [Connecting Printer] message will display and the connection
will not be established. In this case, disconnect the USB cable, and then
follow the procedure from Step 1 and onward.
■ Disconnecting the camera and PC : Refer to page 86
(Removing the removable disk).
● Before inserting any cables or AC adapter, check the directions and
do not insert by force. It may damage the cable or camera.
Starting PC mode
• In this mode, you can download stored images to your PC through the USB
cable.
• The AMOLED monitor is always turned off in PC mode.
■ Connecting the camera to a PC
1. Connect the PC to the camera with the USB
cable.
2. Select the [USB]-[Computer] menu by using
the smart button.
USB
Computer
Printer
When the cradle is not used