Filter
Top Products
ŝ87Ş
Setup menu 2
[ Selecting Video out type ]
ƈ The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.)
to which the camera is connected. PAL mode can support only BDGHI.
[ Calibration]
ƈ This menu will increase the sensitivity of the Touch Pen. Press the Touch Point
on the LCD monitor with the Touch Pen.
ſ After pressing the Touch Point three times, the
menu is set and pre-view image will display.
ſ When you calibrate the LCD monitor, press the Calibration point exactly or
menus on the LCD monitor won't be selected or set.
ƈ Connecting to an external monitor
When the camera is connected to an external monitor in the play back mode,
the image (movie or still image) will be visible on the external monitor and the
LCD monitor of the camera will turn off.
When connected to an external monitor, some functions are not available.
NTSC
PAL
Video Out
Format
Reset
Setup 2
Quick View
0.5sec
Power Off
3min
Setup 2
Calibration
LCD Save
Off
Yellow - Video
White - sound
Video Out
NISC
Touch
Setup 2 / Calibration
Touch
Setup 2 / Calibration