Filter
Top Products
《29》
Focus lock Flash ( ) / Left button
To focus on a subject not positioned in the centre of the picture, use the focus
lock function.
■Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights
up, it means the camera is focused on the subject. Be careful not to press the
SHUTTER button all the way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera
to recompose your picture as desired, and then press the SHUTTER button
completely to take the picture. If you release your finger from the SHUTTER
button, the focus lock function will be cancelled.
1. The image to be
captured.
2. Press the SHUTTER
button halfway and
focus on the subject.
3. Recompose the picture
and fully depress the
SHUTTER button.
When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
button.
■Selecting the flash mode
1. Press the Mode button to select a RECORDING mode with the exception of
the Movie clip mode or the ASR mode. (p.33)
2. Press the Flash button until the desired flash mode indicator is displayed on
the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
■Flash range
※When the Super Macro is selected, flash is fixed as the Flash Off mode.
(Unit : m)
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 3.0 0.5 ~ 2.5 0.2 ~ 0.8 0.5 ~ 0.8 0.2 ~ 3.0 0.5 ~ 2.5
Macro
Auto macro
ISO
AUTO
[Selecting the Auto flash]
Normal