Filter
Top Products
Self-timer ( ) / Right button
《32》
■Selecting the self-timer
1. Select a RECORDING mode with the exception of VOICE RECORDING
mode. (p.33)
2. Press the SELF-TIMER ( ) button until the desired mode indicator
displays on the LCD monitor. A 10 second, 2 second, Double self-timer or
Motion timer icon appears on the LCD monitor.
•10SEC self-timer ( ):
Pressing the shutter button will allow an interval
of 10 seconds before the image is taken.
•2SEC self-timer ( ):
Pressing the shutter button will allow an interval
of 2 seconds before the image is taken.
•Double self-timer ( ):
A picture will be taken after about 10 seconds
and 2 seconds later a second picture will be
taken. When using the flash, the 2-second self-timer may be delayed for
longer than 2 seconds depending on the flash charging time.
•Motion Timer ():
The camera detects the subject's movement 6 seconds after pressing the
Shutter button, and the picture is taken when the movement is stopped.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.
[Selecting the 10 SEC self-timer]
*1 : The camera detects the subject's movement 6 seconds after pressing the
Shutter button, so confirm the composition within 6 seconds.
*2 : Move your body or hands fully.
■Motion Timer
■The Motion Timer flows are as followings.
Selecting the Motion Timer → Pressing the Shutter button → Confirming the
composition (Within 6 sec.) → Starting the detection (Swing your hands fully)
→ Stopping the detection (Do not move) →Taking an image (after 2 sec.)
*1
*2
In the following cases, the Motion Timer may not operate.
●The focus distance is over 3m.
●The exposure is too bright or dark
●In backlight conditions.
●The movement is insignificant
●The movement is detected out of the
center part (50%) of the sensor
where the movement is recognized.
The detection range of Motion Timer
Pressing the Shutter button after setting
the Motion Timer
Detecting the subject's movement
Blink (1 second interval)
Blink (0.25 second interval)
Turn on and the image is taken after
2 seconds.
No movement is detected
Icon & Self-timer lamp
Motion