Filter
Top Products
Setup menu 2 ( )
《59》
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
- Sub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
Quick view
If you set the [LCD save] to On and the camera isn't operated during the
specified time, the LCD monitor will be turned off automatically.
- Sub menus
[Off] : The LCD monitor will not be turned off.
[On] : If the camera isn't operated during the
specified time (about 30 SEC.), the camera
power will be idle (Camera status
lamp:Blinking) automatically.
LCD save
This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
- Sub menus
[Off] : The power off function will not
operate.
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
- After replacing the battery, the power off setting will
be preserved.
- Note that the automatic power off function will not operate if the camera is in the
PC / Printer mode, slide show, playing back a voice recording and playing back
a movie clip.
Auto power off
Quick View
SETUP2
LCD Save
Video Out
Off
1 sec
3 sec
0.5 sec
Power Off
Format
Reset
Back Set
◀
OK
Quick View
SETUP2
Video Out On
Off
Power Off
LCD Save
Format
Reset
Back Set
◀
OK
Quick View
SETUP2
LCD Save
Video Out
5 min
10 min
Off
3 min
1 min
Power Off
Format
Reset
Back Set
◀
OK