Filter
Top Products
《47》
Drive mode
ISO
■How to use the wise shot
1. Select the ASR mode bu pressing the
mode button.
2. Select the wise shot menu in the [DRIVE] menu.
3. Press the Shutter button to take image.
4. The captured images are displayed.
- To select an image, press the Left/Right button.
- Press the E button and you can check the enlarged image by pressing the 5
function button.
- Press the E button again and the image is enlarged automatically.
5. Press the OK / Shutter button and the selected image will be saved.
●It is best to use a tripod for the AEB shooting as the time to save each
image file is longer and blurring caused by camera shake may occur.
●In the Wise shot mode, the shutter speed value shown on the LCD
monitor may be different to the actual shutter speed.
●If 7MP or 6MW image size is selected, the Wise Shot menu can't be
selected.
●High resolution and picture quality increases file saving time, which
increases stand-by time.
●If the [Continuous], [Motion Capture] or [AEB] sub menu is selected,
the flash will be off automatically.
●If less than 3 pictures are available in the memory, the AEB shooting is
not available.
[Auto] :
The camera's sensitivity is automatically changed
by variables such as lighting value or subject
brightness.
[ISO 50, 100, 200, 400, 800, 1600 ] :
You can increase the shutter speed while the
same amount of light is present, by increasing the
ISO sensitivity. However, the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light and
therefore the greater its capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO value increases, making
the image appear coarse.
You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
ISO
Auto
DDRRIIVVEE
WWiissee
SShhoott
Save
Move
OK E
Image with Flash
Enlarged image
Image with the ASR mode
Enlarged image