Filter
Top Products
frst trne settinqs
SETTIIIHGTIIHE TillME ZOH E AHIII)III)ATIE_]ME IIF01113TIIHE III:IIIIIF/STTillME
Set the date and time of your local area when you turn on this camcorder for the first time,
1o Open the LCD screen to turn on the camcorder.
• Your camcorder turns on automatically when you open the
LCD screen.
• The Time Zone ("Home") screen appears centered on Lisbon,
London (Greenwich Mean Time 00.00).
You can also set your current time zone from the "Settings"
menu. _page 93
2o Select your local area on the map by touching the left ([_1) or right
([_E})tab on the LCD screen, and then press the ([oq) tab.
The "Date/Time Set" screen appears.
3o Touch the date and time information, and change the setting
values by using the up (_) or down (_) tabs.
EEl EZ3 0£]
4o Make sure the clock is correctly set, and then touch the (/_) tab.
• The message "Date/Time Set" appears.
Ifyou finish the setting with (_ 1)tab without touching the
(_) tab, the camcorder does not apply the date/time values
you selected and the <Time zone> screen appears again the
next time you start the camcorder.
o You carl set theyear up to 2039.
Set "Date/Time Display" to "On." _page 91
Activatingthe (Q) iconmoves thetime ahead by 1hour.
• Your camcorder includes a built-in rechargeable battery that retains the date and time
settings even after you turn the camcorder's power off.
• Ifthe rechargeable battery discharges completely, the current date/time values are reset
to the default values. If this occurs, you need to recharge the built-in rechargeable battery
(see below), and then re-set the date and time.
Battery capacity decreases over time and through repeated use. Ifyou find the decreased
usage time between charges becomes significant, ask your local Samsung retailer.
The built-in battery is always recharged when you connect your camcorder to AC power
or attach the battery pack.
Ifyou do not connect the camcorder to AC power or attach the battery pack for two
weeks, the built-in battery fully discharges. Ifthis occurs, charge the built-in battery by
connecting the camcorder to the AC adaptor for 24 hours.