Samsung MM11S(BL) Camcorder User Manual


 
ENGLISH FRANÇAIS
9696
Selecting the Storage Type
Setting the Memory
Camcorder : Setting Memory
You can set the storage to the internal memory or memory card (not
supplied).
1. Press the [POWER] button to turn on the
Memory Camcorder.
The Movie Record screen appears.
2. Set the
System Settings mode by pressing
the [MODE] button.
The System Settings screen appears.
3. Move the [Joystick] left / right to select
<Storage Type>.
4. Move the [Joystick] up / down to select an
option, and then press the [Joystick(OK)].
<Internal>: Movie, photo, music and voice
files are stored in the internal memory.
<External>: Movie, photo, music and voice
files are stored in the external memory (SD/
MMC).
5. After you finish setting, move to the desired
mode by pressing the [MODE] button.
[ Notes ]
If you insert a memory card when the Memory
Camcorder is on, the “pop-up message” will
prompt you automatically to select the storage
type .
If there is no memory card inserted, only the
<Internal> option will be available.
System requires a small portion of memory space, actual storage
capacity may differ from the printed memory capacity.
The maximum recording time and image capacity is subject to
change depending on the media used.
pages 30, 31
Choix du type de stockage
Réglage du Caméscope
à mémoire : Réglages de la mémoire
Vous pouvez régler la sauvegarde sur la mémoire interne ou sur une
carte mémoire (non fournie)
1. Appuyez sur la touche [POWER] pour mettre
le caméscope sous tension.
L’écran Movie Record apparaît.
2. Réglez le mode
System Settings en appuyant
sur la touche [MODE].
L’écran System Settings apparaît.
3. Déplacez le [Joystick] vers la gauche ou vers
la droite pour sélectionner <Storage Type>.
4. Déplacez le [Joystick] vers le haut ou vers
le bas pour sélectionner une option, puis
appuyez sur [Joystick(OK)].
<Internal> : permet de sauvegarder les
fichiers film, photo, MP3 et vocaux sur la
mémoire interne.
<External> : permet de sauvegarder les
fichiers film, photo, MP3 et vocaux sur la
mémoire externe (SD/MMC).
5. Après avoir complété le réglage, déplacez-
vous vers le mode souhaité en appuyant sur
la touche [MODE].
[ Remarques ]
Si vous insérez une carte mémoire pendant
que le Caméscope à mémoire est en fonction,
une fenêtre contextuelle vous demandant
de sélectionner le type de mémoire apparaît
automatiquement.
Si une carte mémoire n’est pas insérée, seule l’option <Internal>
demeure disponible.
Le système ne requiert qu’une petite partie d’espace mémoire ; la
capacité réelle de stockage peut varier de celle indiquée.
La durée maximale d’enregistrement et la capacité d’images peut
varier selon le type de média utilisé. Pages 30 et 31
4
System Settings
Move Select
Storage Type
External
Internal
System Settings
Move Select
OK
TYPE
Storage Type
Internal
External
Sepia
Recording...
12:00AM 2006/01/01
S
F
STBY
00:00:00/00:40:05
Ver.
5
System Settings
Move Select
Storage Type
External
Internal
System Settings
Move Select
Storage Type
Internal
External
Sepia
Recording...Recording...
12:00AM 2006/01/01
SS
720i
FF
STBY
00:00:00/00:40:05
3
System Settings
Move Select
OK
Storage Type
External
Internal
System Settings
Move Select
Storage Type
Internal
External
Sepia
Recording...
12:00AM 2006/01/01
S
F
STBY
00:00:00/00:40:05
TYPE
Ver.
SC-MM11-01064A-IB-USA+FRC.indb 96SC-MM11-01064A-IB-USA+FRC.indb 96 2006-03-27 오후 4:09:042006-03-27 오후 4:09:04