Samsung MM11S(BL) Camcorder User Manual


 
3535
ENGLISH FRANÇAIS
Movie Mode : Recording
Recording
You can record movie and store it in memory.
1. Press the [POWER] button to turn on the Memory
Camcorder.
The Movie Record screen appears.
You can select Movie mode or Previous mode as
the start-up mode in System Settings. page 108
2. Press [Record/Stop] button to start recording.
[] indicator displays on the LCD monitor.
The elapsed and remaining times are displayed
and the Memory Camcorder starts recording.
3. Press the [Record/Stop] button again to stop
recording.
The Memory Camcorder stops recording.
4. After recording, press the [POWER] button to
turn off the Memory Camcorder to prevent battery
power consumption.
The timestamp will be recorded along with the
movie to enable faster searching.
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:00:00:40:05
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:02:00:40:03
12:00AM 2006/01/01 Sepia
S
F
00:00:02:00:40:03
Recording...
Elapsed time Remaining time
[ Notes ]
If the Auto Shut Off is set, the Memory Camcorder turns off
automatically after 5 minutes.
Detach the Battery Pack when you finish recording to prevent
unnecessary battery power consumption.
To adjust the LCD screen brightness, set the <LCD Brightness> in
System Settings mode. page 101
The LCD monitor brightness will not affect the brightness of the recording.
If you are recording with the LCD monitor closed, the built-in microphone
will not be facing forward, which can cause deterioration of the sound
strength. We recommend recording with the LCD screen open.
Reading the Counter
Mode Movie : Enregistrement
Enregistrement
Vous pouvez enregistrer une sequence movie et la sauvegarder en mémoire.
1. Appuyez sur la touche [POWER] pour mettre le
caméscope sous tension.
L’écran Movie Record apparaît.
Vous pouvez sélectionner le mode Movie ou
Previous comme mode de démarrage à l’aide de
System Settings. Page 108
2. Appuyez sur la touche [Record/Stop] pour lancer l’
enregistrement.
Le témoin [] s’affiche à l’écran.
Le temps écoulé et le temps restant s’affichent et
l’enregistrement débute.
3. Appuyez à nouveau sur le bouton [Record/Stop]
pour arrêter l’enregistrement.
L’enregistrement s’arrête.
4. Après l’enregistrement, appuyez sur la touche
[POWER] pour éteindre le Caméscope à mémoire
afin d’empêcher la consommation d’énergie du
bloc-piles.
L’horodateur est enregistré avec le film pour
faciliter la vitesse de recherche
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:00:00:40:05
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:02:00:40:03
12:00AM 2006/01/01 Sepia
S
F
00:00:02:00:40:03
Recording...
Temps écoulé
Temps restant
[ Remarques ]
Si la fonction Auto Shut Off est activée, le caméscope se met hors
tension après 5 minutes.
Enlevez le bloc-piles lorsque l’enregistrement est terminé pour éviter la
consommation d’énergie inutile.
Pour ajuster la luminosité de l’écran LCD, réglez la fonction <LCD
Brightness> du mode System Settings. Page 101
La luminosité de l’écran LCD n’affecte pas la luminosité de l’enregistrement.
Si vous enregistrez avec l'écran LCD rabattu complètement vers l’
extérieur, cela obturera le microphone intégré et provoquera une perte de
son et produira du bruit. Veuillez donc vous assurer que le microphone
intégré demeure libre pour l’enregistrement.
Lecture de la minuterie
1
2
3
12:00AM 2006/01/01 Sepia
Recording...
SS
FF
STBY
00:00:00:00:40:05
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:02:00:40:03
12:00AM 2006/01/01 Sepia
S
F
00:00:02:00:40:03
Recording...
720i
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:00:00:40:05
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:02:00:40:03
12:00AM 2006/01/01 Sepia
SS
FF
00:00:02:00:40:03
Recording...
720i
12:00AM 2006/01/01 Sepia
Recording...
S
F
STBY
00:00:00:00:40:05
12:00AM 2006/01/01 Sepia
Recording...
SS
FF
STBY
00:00:02:00:40:03
12:00AM 2006/01/01 Sepia
S
F
00:00:02:00:40:03
Recording...
720i
SC-MM11-01064A-IB-USA+FRC.indb 35SC-MM11-01064A-IB-USA+FRC.indb 35 2006-03-27 오후 4:06:342006-03-27 오후 4:06:34