Filter
Top Products
Shooting options
44
Shooting in the dark
•Flash options are not available if you set burst options or select
Self-Shot or Blink Detection.
•Make sure that your subjects are within the recommended distance
from the flash. (p. 102)
•If light from the flash is relected or there is a large amount of dust in
the air, tiny spots may appear in your photo.
Adjusting the ISO speed
The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.
1
In Shooting mode, press [ ].
2
Select Shooting → ISO → an option.
• Select to use an appropriate ISO speed based on the
brightness of the subject and lighting.
•The higher ISO speed you select, the more image noise you may get.
•When you select Motion Capture, the camera sets the ISO speed
to Auto.
Option Description
Red-eye Fix*:
• The flash fires twice when the subject or background
is dark. The subject should not move until the flash
fires a second time.
• The camera corrects red-eyes through its advanced
software analysis.
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to
capture ambient light to reveal more details in the
background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning (
) when
you are shooting in low light.
Fill in:
• The flash always fires.
• The camera adjusts light intensity automatically.
Red-eye*:
• The flash fires when the subject or background is
dark.
• The camera reduces red-eyes.
Auto: The flash fires automatically when the subject or
background is dark.
The options may differ depending on the shooting mode.